Air shower room is mainly divided into all cold plate air shower room and all stainless steel air shower room. Air shower manufacturing expert Wuxi Yijing Purification Equipment Co., Ltd. reminds you to pay special attention to the following points in the delivery and acceptance process of the air shower room:

First, the first is to see if the overall surface of the air shower room has been scratched or paint off, if it is scratched or paint off the consequences is soon to rust.

Second, the second is the welding point of the air shower box, which is also very key. The welding process is slightly bad, which not only affects the appearance, but also causes air leakage in the air shower room.

Three, again is the air shower high efficiency filter filtration efficiency, at least meet the 0.3μm particle filtration efficiency ≥99.97% filter.

Four, finally is the wind speed of the air shower outlet, generally manufacturers can reach: 20-28m/s. Below the above standards, the effect of the air shower room will not be ideal.

Choose a good quality air shower, not only to distinguish between good and bad in the circuit board. There are stainless steel doors, interlocking, air shower nozzle, handle, fan, control panel and so on.

The market demand of air shower room is quite huge, the domestic air shower room also has a continuous improvement of technology with the development of high technology industry, and the increasing expansion of application field, also makes the domestic purification industry growing. Only the continuous promotion of the air shower can make the production of products and people's life have a safer and cleaner environment, accelerate the sustainable development of domestic industries in various fields!