With the development of science and technology, all walks of life are developing rapidly, especially the electronics industry is being updated rapidly. In many cases, the building plan and space design of the original clean workshop of the electronics industry is not suitable for the development of modern times, and must be transformed in order to better reduce the cost. Let's learn more about it today.

I. Guiding ideology of clean workshop design for electronics industry:

In the design of clean workshop in the electronics industry, to achieve advanced technology, economical, safe and reliable, save resources, reduce energy consumption, ensure quality, meet the requirements of labor health and environmental protection, meet the requirements of fire prevention and evacuation, and according to the actual situation for the production development and process improvement needs to reserve conditions, mainly summarized as the following:

1. Meet the needs of process transformation and scale expansion, and realize the adjustment of production process and equipment without increasing the building area or changing the building height.

2. The main structure of the workshop should adopt large space and long span column network in order to adapt to the adjustment of product production process, expansion of production scale or upgrading of products.

3. The load-bearing system of the inner wall should not be adopted in the workshop to avoid the adjustment of the production process or equipment due to the fixed bearing inner wall.

4, the safety exit should be reasonably dispersed layout, and should be equipped with obvious evacuation signs, in order to facilitate the safe evacuation of personnel.

5, should strengthen the fire technical measures, improve the detection of various dangers, alarm and rescue facilities.

2. Technical scheme of clean workshop for electronics industry

1. The main building space shall be equipped with technical interlayers, technical passages and corresponding auxiliary rooms.

2, the main structure form, structure, material should meet the requirements of safety, reliability, fire resistance.

3. Fire protection measures are designed with indoor and outdoor fire hydrants, automatic sprinkler system, fire extinguisher and fire alarm system. The key equipment is equipped with fire alarm system and fire extinguishing device, and the return air flow is equipped with high sensitivity early fire alarm detection system with sensitivity higher than 0.01%obs/m, emergency lighting and evacuation instructions.

4. The main production workshop or densely staffed workshop should be arranged in a place with gentle site, wide sight, convenient fire access and easy fire fighting.

Three, the electronic industry clean workshop has the following main characteristics:

1. In the production process of electronic products such as electronic materials, semiconductor devices, integrated circuits, liquid crystal display devices and so on, flammable and explosive gases and chemicals need to be used, which pose a potential fire threat to clean workshop.

2, some electronic industry clean workshop area, large volume, and often plane layout, space layout twists, increase the obstacles on the evacuation route, may extend the time of safe evacuation.

3. The production process of electronic products in clean workshop requires the application of various types of precision and valuable equipment and instruments. The construction investment is huge, once the fire starts. Will cause great loss. In view of the more prominent characteristics of the electronic industry clean workshop compared with the ordinary industrial workshop, the National Ministry of Construction specifically for this kind of building to develop a special code, namely, "Design Code for the electronic industry Clean Workshop".

Four, fire prevention and evacuation

With the development of electronic industry technology, now the continuity of the production process of electronic products or the need for automatic transmission equipment in the production process, electronic clean workshop can not be separated according to the requirements of fire partition.

Our country built a batch of large-scale clean factory building for LSI chip production, TFT--LCD production clean factory. Their clean room area and fire prevention zone are greatly greater than the current national standards "Code for Clean factory design", "Code for building fire prevention design" area.以上翻译结果来自有道神经网络翻译（YNMT）· 通用场景