Hundred grade dust-free workshop floor and its characteristics, what are the characteristics of the floor of the purification workshop, Hundred grade dust-free workshop floor classification.

In the creation of a dust-free workshop, the floor should meet some of the production process of detailed products begged: the ground should be flat, wear-resistant, easy to clean, not easy to stack static electricity, avoid glare, do not crack.

At home and abroad, a variety of methods are used on the floor of the purification room of industrial products. At present, the primary common use is pasted floor, terrazzo floor, coated floor and metal grille ventilated floor. So what are these characteristics?

1、 posted the ground is soft PVC board, PVC half hard board, etc., have a sheet and coil methods, has must of elasticity, is can't afford to wear dust, easy to clean, corrosion resistant, antistatic, more beautiful, but the overall bosom, joint and post construction quality control, using effect, suitable for electronic, fine production generally clean room, less used in the pharmaceutical industry.

2、 terrazzo ground has good integrity, smooth, wear-resistant, not easy to dust, brief clean, anti-static, no elasticity and other characteristics, but due to the practice of data and construction quality of brief out of control and other problems, less used in the production of electronic products, more suitable for food, cosmetics, general API industry.

 3、 coating the ground is divided into polyurethane coating or polyester resin and epoxy resin mortar, cement floor, monotonous at room temperature curing polyurethane coating, such as metal, concrete has a remarkable adhesion, easy and construction, with the light table bleaching, good elasticity, easy to clean, water resistant, cream, corrosion resistance and wear resistance, etc., in polyester resin or epoxy curing agent, pigment, etc., The selection of coating construction method or flow delay trial method (that is, self-leveling) or cement construction method, with easy construction, corrosion resistance, water resistance, good mechanical strength, impact resistance, clean and beautiful surface, if the addition of anti-static information, good electrical conductivity, is now the industrial products used in the clean room commonly on the ground.

4、 metal grille ventilation floor in single straight flow purification workshop as return air grille is applied, the general selection of porous plate, the application is made up of a number of activities of the unit do together without perforation, configuration on the corresponding support structure, the number of porous plate, opening rate and equipment bearing should be based on individual flow clean room air velocity, air volume, The opening rate of the general porous plate is about 6%-40%, which is mainly used in the high-grade purification room of the electronics industry, fine production industry and aerospace industry.