Electronic assembly workshop belongs to a special production workshop, which not only has certain requirements for dust-free, but also has certain requirements for anti-static electricity. So, what are the requirements of electronic assembly dust-free workshop? Today, with Xiaobian to understand the next!

As a professional production workshop, the production workshop should naturally carry out professional decoration and construction, such as the floor, workbench pad, seats and so on of the workshop should meet the requirements of anti-static. This workshop should maintain the indoor constant temperature and humidity environment. At the same time, it is also necessary to equip anti-static material box, turnover box, PCB frame, logistics car, anti-static packaging belt, anti-static wrist strap, anti-static soldering iron and tools and other facilities.

The requirements of electronic assembly dust-free workshop are mainly reflected in the cleanliness of the workshop. We know that according to the common cleanliness grade classification, the cleanliness level can be divided into six levels, including ten, one hundred, one thousand, ten thousand and one hundred. Different levels have different dust-free requirements, that is, the concentration of dust is not the same. Therefore, it depends on what kind of products are produced in the electronic assembly workshop and what are the differences in the production environment, so as to determine the cleanliness level in the workshop, and then set the dust-free requirements in the workshop according to the dust-free requirements of different cleanliness. Many electronic products are very sensitive to dust particles in the production environment, the number of dust particles in the air is likely to lead to short circuit phenomenon of electronic products, bring great damage to the products, make the defective rate of electronic products, affect the economic benefits of enterprises. Of course, dust-free is not absolute dust-free, just that the degree of dust-free in the workshop is higher, like a level 10 workshop, the degree of dust-free is very high, almost no dust. One hundred thousand level of dust-free degree is larger, but for some requirements are not very high production of products can still meet.

Electronic assembly dust-free workshop requirements

1. High air cleanliness requirements: The air cleanliness requirements in the workshop shall reach level 5 or above in the ISO 14644-1 standard, that is, the concentration of particulate matter per cubic meter of air shall not exceed 100,000.

2. Strictly control personnel entry and exit: personnel entry and exit in the workshop should be strictly controlled, requiring professional dust-free clothing and shoe covers to be worn, and washing hands and disinfection should be carried out before entering the workshop.

3. Clean the workshop regularly: the workshop should be cleaned regularly, including the ground, walls, ceiling, equipment, etc., to ensure the air quality in the workshop.

4. Control workshop temperature and humidity: the temperature and humidity in the workshop should be controlled within a certain range to ensure product quality and performance.

5. Use dust-free equipment and tools: the equipment and tools in the workshop should use professional dust-free equipment and tools to reduce the production of dust and small particulate matter.

6, regular detection of air quality: the workshop should be regularly detected air quality, to ensure that the dust-free requirements.

Operating rules for electronic assembly dust-free workshop

1. Wear dust-free clothes and shoe covers: Before entering the workshop, you must wear professional dust-free clothes and shoe covers, and wash hands and disinfect them.

2. Use dust-free equipment and tools: The equipment and tools in the workshop must use professional dust-free equipment and tools to reduce the production of dust and small particulate matter.

3. No smoking and food entering the workshop: no smoking and food entering the workshop to prevent dust and small particulate matter.

4. Do not move equipment and tools at will: the equipment and tools in the workshop must be placed in the designated position, and do not move at will to prevent dust and small particulate matter.

5. Strictly follow the operating rules: The operators in the workshop must strictly follow the operating rules. If there is any violation, they will be punished accordingly.

6. Regular training of operators: The operators in the workshop must receive regular dust-free operation training to improve their operating skills and awareness.