Dust-free workshop has a very high requirement for the cleanliness of indoor air. No matter what industry the dust-free workshop has, it is necessary to do a good job in daily maintenance to ensure the cleanliness of the room, so as to ensure the safety of equipment or personnel. So, how do you maintain it? In fact, in daily life is mainly to do the following points can be.

First, the personnel in and out must carry out personal purification treatment according to the requirements, and the entry and exit should be carried out according to the prescribed sequence and route, and the items in the dust-free workshop can not be taken out. Most of the clean workshops, especially the clean workshops used in the electronics industry, have strict constant temperature and humidity requirements, not only for the temperature and humidity in the workshop, but also for the fluctuation range of temperature and relative humidity.

Second, if there is a shower room, each time to enter according to the provisions of the shower, and each time the number of people entering the workshop to control (control) within the prescribed limits, at the same time, and Produce unrelated easy to Produce dust items into the dust-free workshop, The Draught Fan or power supply is not allowed to be forcibly closed if entering the dust-free workshop. Dust-free workshop for the purification of air conditioning system humidification problem, there are many commonly used humidification methods, such as water, wet film, high pressure spray ultrasonic water humidification, these humidification methods belong to the same enthalpy humidification process. The steam injection, dry steam injection and electrode (electric heating) humidification is to spray steam to air conditioning, the humidification method is an isothermal humidification process.

Third, it is forbidden to smoke, eat, drink and do other activities unrelated to Produce. In addition, do not make large movements, walk not the heel pull shoes, do not wear clean work clothes in and out of the toilet.

Fourth, when entering the dust-free workshop, wear good clothes with a good hat and rubber sleeve as required. After coming out, take off the clothes from the bottom to the top and put them in the prescribed place. When exiting the workshop, you can not go through air blowing.

In short, no matter what industry, as long as there is dust-free workshop must do a good job of workshop management and maintenance.

Advantages of dust-free room: simple structure, low system construction cost, easy expansion of clean room, in some special purpose places, can be used to improve the grade of clean room dust-free table. Dust-free workshop management maintenance is very important, managers also pay special attention to, to do daily cleaning and sterilization (fungus) work, completes the equipment management, often related personnel entering the workshop for related training (role: knowledge transfer, skills transfer, standard transmission), manage staff entering the workshop, Eliminate all activities that might (maybe) generate dust.