News

How to use a clean workbench

Industrial modular Clean Room time:2022/12/15 15:49:40 click:138

How to use a clean workbench

I. Operation process of ultra-clean workbench:

1. Preparation before launch:

(1) The inspection conditions shall be marked that the facilities shall be in good condition;

(2) About 30 minutes after use, turn on the ultraviolet sterilization lamp, direct sterilization of the working parts;

(3) when using more than 20 minutes will clean the air running, and wipe the cabinet table clean;

(4) Wipe and disinfect the part of a means/object that needs to be used with alcohol cotton and put it on the working table;

(5) Pull off the double-sided glass lampshade of the operating table. Be careful to use your hands evenly.

2. Start:

(1) Turn on the light switch during operation, and turn off the ultraviolet sterilization lamp;

(2) The operation area is a clean platform area, so the position in the work should not hinder the normal flow of the cyclone, the operator should try to avoid causing the disturbance of the cyclone action;

(3) The operator shall wear work clothing.

3 Shutdown:

(1) Terminate the operation of the centrifugal fan after the work is completed;

(2) Clean equipment and office space.

Two, the application of ultra-clean workbench common problems:

1, every 3-6 months with the instrument to measure the characteristics of the ultra-clean table has changed, detect the wind of the whole equipment (such as: the wind of the operating area is less than 0.2M/s, to solve the filtration device gradually do cleaning and deashing solution to replace the new filter device);

2. When dismantling and replacing the efficient air supply outlet, pay attention to the model specifications, specifications and appropriate specifications (the original manufacturer's configuration), according to the arrow indicating the equipment, and pay attention to the sealing near the filter, there must be no leakage;

3, maintain indoor dryness and cleaning, wet environment will not only make the production of raw materials rust, but also affect the normal operation of the electrical circuit, and clean natural environment is beneficial to increase the service life of the filter plate;

4. There is no need to have this aspect of vibration goods, otherwise it will harm the service life of the centrifugal fan inside the operating table;

5. Be careful when transporting to avoid impact and prevent damage.