News

Three steps directly affect the safety accident of clean workshop

Industrial modular Clean Room time:2022/12/12 15:36:19 click:130

Step 1: Anyone entering the dust-free workshop must first enter the dust-free dressing room, put on dust-free hat, mask, dust jacket, electrostatic dust gloves, dust-free pants, dust-free boots. A cool looking dust-proof device can keep the dust you already have out of the dust-free workshop, but that's just the first step.

Step 2: Then enter the shower room. What we call the air shower room is a "corridor of blowing wind", but the strong wind blowing in this corridor is ionic wind, without any static electricity. The neutralization ability of the ionic wind can balance the amount of positive and negative charges in the human body, and rely on static electricity to absorb the dust of hair and clothing, and can automatically fall off and adhere to the blue dust removal mat on the floor.

Step 3: Walk through the air shower and enter the dust-free workshop. If the products produced in the dust-free workshop should be anti-static, static electricity should also be completely eliminated in the body through the "static bridge". If you enter a class 100 clean room, repeat 2,3 steps. What is the concept of dust-free? According to international practice, the dust-free purification grade is mainly determined by the particle diameter greater than the number of particles in the air per cubic meter. That is, the so-called dust-free is not 100 percent dust free, but controlled in extremely small units. Indeed, the particles in this standard that meet the dust standard are already insignificant compared to the dust we commonly see, but for optical structures, even tiny dust can have a large negative impact, so for the production of optical construction products, dust free is an inevitable requirement.

Dust-free workshop manufacturer special reminder: please be sure to comply with the above points, for the sake of your safety.