Construction requirements of clean worktable in dust-free workshop!

Clean bench is one kind of provide local work environment clean, sterile air purification equipment, and the workspace has polluted air filter through specialized channel artificially controlling emissions, avoid the harm to people and environment, special clean bench is a safe means of microorganism, also can be widely used in biological laboratory, medical and health, biological, pharmaceutical and other related industries, It has good effect on improving process conditions, protecting operator's health, improving product quality and yield. So today xiaobian is mainly to share with you the structural requirements of clean worktable in dust-free workshop:

The clean table in the dust-free workshop can maintain local purification of high cleanliness on the operating table according to the requirements of products or other uses. Clean table can form aseptic, dust-free local purification in the local space of the operating table, its main components are pre-filter, fan unit, shell, hydrostatic box, table and supporting electrical components.

Construction requirements of clean table in dust-free workshop:

Table: made of wood plastic veneer affixed to laminate on the table, or made of stainless steel table;

Box body: with hot tie thin steel plate and skeleton gas welding easy deformation, can be used cold rolled sheet folding lap, high current welding, the inner surface needs to paste muffling material, the maximum size should be through the general door is appropriate;

Box sealing: all gaps are sealed by sealant; The section of the operating area should be the same as the air filter section as far as possible to reduce the blind area;

Fan and motor: small fan with high pressure and low noise is selected. Soft connection is used for connection between fan and box body. Vibration reduction measures should be taken for motor and fan.

Lampshade: fluorescent lamp should be set as far as possible in the lampshade, lampshade through clean air flow;

Pre-filter: pre-filter must be set, the capacity should be large, in the use of air volume, the initial resistance should be less than 50Pa;