Lithium battery dust-free workshop design material selection points we have to explain? Read this article carefully if you don't know.

Haili heng purification company is a professional manufacturer of air purification equipment, the products are widely used in electronics, electrical appliances, medicine, food, scientific research and other industries, and has the overall system service system for security and rich production experience.

Today hailheng purification and you talk about: lithium battery dust-free workshop design material selection points to note:

One, lithium battery dust-free workshop decoration material selection matters needing attention

The overall requirements of dust-free workshop for lithium battery production are relatively high. In the workshop construction process, some main materials with high strength, good flatness, easy installation, meeting fire requirements, structural density and thermal insulation performance should be selected.

1, partition wall: in addition to the fire partition wall, all the use of manual rock wool board, rock wool board can withstand low temperature humidity room plate shrinkage performance.

2, ceiling: the use of manual single-sided glass magnesium rock wool board, the lower surface rock wool, not only to ensure the bearing performance of the plate, but also to avoid the aesthetic problems caused by the contraction of the plate.

3, doors and Windows: the door body is made of formed steel purification door, with a sealing strip at the door and a layering strip at the bottom to ensure air tightness. Double - layer vacuum tempered glass window, to ensure low temperature and humidity environment perspective effect and airtight.

4, steel frame: in order to bear the bearing capacity of the ceiling, wind control pipeline, fire pipeline, etc., it is necessary to build the secondary steel frame inside the original plant (if the surface bearing capacity of the frame structure is strong, it is not necessary).

Ii. Electrical project of lithium battery dust-free workshop

1, lighting engineering: workshop lighting including purification lamp, mining lamp, explosion-proof lamp, etc. The floodlight in maintenance is the mine lamp. Emergency lighting is arranged in accordance with the fire protection requirements, lighting control is centralized and decentralized, the corridor is divided into double controlled tripping, easy to turn on and off lights and energy saving.

2, power and electric engineering: statistics of total electricity consumption, to provide a basis for rational selection of transformers.

3. The power main bridge is laid along the auxiliary room, and then divided into the workshop and the equipment electric box.

Three, lithium battery dust-free workshop hVAC project

1. Air duct: the dehumidification area return duct is made of stainless steel fully welded air cabinet, and the rest of the air duct is made of galvanized Angle iron flange air duct.

2, exhaust: power cabinet area, the power cabinet on the general own fan, installed air duct connected to the ceiling, and then opened from the side wall or ceiling into the louver, so that the natural circulation of the exhaust part, avoid too high positive or negative pressure, affect the air parameters of the next room, air conditioning refrigeration internal circulation.