Cleaning requirements and standards for clean rooms

(1) Clean room dust-free cloth should be used when cleaning the walls of the clean room;

(2), with 90% deionized water and 10% isopropyl alcohol configuration cleaning agent;

(3) Use approved cleaning room special detergent;

(4) Check the dustbins in the workshop and preparation room every day, and remove them in time.

(5) Every floor should be vacuumed. At each shift, the completion of the work should be marked on a map, such as where it ends and where it begins.

(6) The floor of the clean room should be cleaned with a special mop.

(7) special vacuum cleaner with high efficiency filter should be used for vacuuming in the clean room.

(8) All doors need to be checked and dried

(9) After sucking the ground, wipe the ground. Clean the walls once a week.

(10), under the overhead floor should also be vacuumed and wiped.

(11) Once every three months, clean the pillars and support columns under the overhead floor.

(12) must remember when working, is always from the top down, from the farthest away from the door to the direction of the door rub.